Car Harmonizer (Travel and on-the-go remediation)

SKU:
$74.95
$74.95
Unavailable
per item

The Car Harmonizer is designed for use in any vehicle with a standard 12-volt charging port and is intended to help support a more balanced energetic environment by addressing multiple types of EMF exposure, including Radiofrequency (RF), Magnetic Fields, Electric Fields, and Dirty Electricity.


Installation & Compatibility

Plug the Car Harmonizer into any available 12-volt port in your vehicle. For best results, choose a port that is close to where you sit, such as one near the driver or passenger seat. Once plugged in, the Car Harmonizer begins working immediately—no additional setup is required.


The unit includes a digital display that shows the available voltage (usually between 12–14 volts). This reading is only for monitoring electrical output and is not connected to the EMF harmonizing function. The Car Harmonizer also includes two USB ports, which you can use to charge compatible devices. However, charging a device through the Car Harmonizer does not provide EMF support to that device.


The Car Harmonizer may remain plugged in at all times and does not affect the vehicle’s battery function. However, in extreme conditions—such as freezing temperatures, excessive heat, or direct sun exposure—it is recommended to remove the unit to preserve its longevity.


For Hybrid and Electric Vehicles

Vehicles with higher electrical output, such as hybrids and fully electric cars, may require additional support:


  • For hybrid vehicles, we recommend using two Car Harmonizers.
  • For fully electric vehicles with a 12-volt port, use one Car Harmonizer along with three Better ZZZs.
  • If your electric vehicle does not have a 12-volt port, use four Better ZZZs in place of the Car Harmonizer.


Better ZZZs Vehicle Placement

Better ZZZs can be used on their own or alongside the Car Harmonizer to provide additional support in the vehicle.


To install:

  1. Place one Better ZZZs unit on the driver’s side of the center console, near the metal seat guide. Make sure it is secure and does not interfere with seat movement.
  2. Place the second unit on the passenger’s side, near the corresponding seat guide.
  3. Place the third unit on the driver’s side rear floorboard, ideally under the floor mat if it won’t move or pose a safety risk.
  4. If using a fourth unit, place it on the passenger’s side rear floorboard, again under the mat if secure.


Alternatively, a Better ZZZs can be placed under the front seat, accessed from the back seat area.


Important Safety Note

Do not place any Better ZZZs unit on the driver's side floor or in any area where it could interfere with foot movement, pedals, or vehicle operation. Always ensure the unit is placed securely and does not obstruct seat adjustments or passenger safety.


Using Better ZZZs with Limited Ports

If your vehicle only has one 12-volt charging port, you can still use the Car Harmonizer and enhance its support by adding one Better ZZZs placed near the center console.


Product Dimensions

  • Car Harmonizer: 2.0” x 3.0” x 5.0”
  • Better ZZZs: approx. 5.0″ x 5.0″ x 0.4″


Need Assistance?

For placement guidance or help determining the best configuration for your vehicle, contact us at: [email protected]


Disclaimer

This product and the information provided are for environmental and energetic support purposes only. The Car Harmonizer and Better ZZZs are not medical devices and are not intended to diagnose, treat, cure, or prevent any disease. Individual experiences may vary. Always use care and discretion when installing in vehicles, and consult a qualified professional with any health or safety concerns.


​Please Note: Coupons are only valid on purchases made through www.mindbodybalancefl.com.