What's Included in the Home Bundle: 1 Home Harmonizer, 1 Device Chip, 1 Better ZZZs

Home Harmonizer

The Home Harmonizer is essential for EMF remediation in homes, apartments, condos, townhomes, and business offices. One unit effectively covers a space under 4,000 sq. ft.--as long as the property does not have solar panels or a metal roof.

If your space has any of the following, you’ll need to add a Booster Box to strengthen the harmonizing field:

• Solar panels
• A metal roof
• Over 4,000 sq. ft. of space
• An electric transformer on or near the property
• Proximity within 300 feet of a cell tower or SCADA pole

Think of proper EMF remediation like a justice scale: the more EMF toxicity in your environment, the more harmonizing support is needed to bring balance. Without the correct setup for your space and technology, exposure points will remain.

Installation

The Home Harmonizer can be installed in several safe and effective ways. While the preferred placement is on the exterior electric meter (analog, digital, or smart), installation should be approached with care and proper judgment.

Clamp Installation:

• For properties with above-ground wiring, use the provided metal clamp to secure the unit to the pipe exiting the top of the meter box.
• For underground wiring, clamp it to the pipe exiting the bottom of the meter box.
• The included clamp allows for non-invasive installation; however, always ensure the unit is secure and not interfering with electrical components.

Alternative Mounting Options:

If access to the electric meter is limited:

• The unit can be screw-mounted to surfaces such as brick, stucco, or sheetrock. Always confirm property ownership or permission before drilling.
• If screwing into a surface is not preferred, place the unit on a stable shelf positioned near the electrical panel, ensuring it does not block access to the breaker panel door or pose a tipping hazard.

INSTALL TIP #1 – Best Place to Install

Put the Home Harmonizer where the electricity enters your home. The best spots are:

• On or next to your electric meter outside (that’s the gray box from the power company)
• On the metal pipe near the electric meter (use the clamp included)
• If you can’t get to the meter, place it near your fuse box or breaker panel inside (as a backup option)

INSTALL TIP #2 – Give It Space

The Home Harmonizer works best when it has some space around it.

• Don’t sandwich it between two metal or electrical objects
• Make sure there’s at least 8 inches of open space behind or opposite the box

⚠️ Disclaimer: Installation should only be performed by individuals comfortable with basic hardware handling. If unsure, consult a licensed professional. The manufacturer and distributor are not responsible for improper installation, damage, or injury resulting from misuse or failure to follow local regulations.

Important Note:

Due to limited U.S. manufacturing (only two companies produce these specific gray boxes), you may notice slight cosmetic blemishes. Please know that every unit is brand new and fully functional, despite minor visual imperfections.

Dimensions: 4″ x 4″ x 4″

For Sensitive Individuals Starting EMF Remediation:

Begin with the Home Harmonizer (and Booster Box if needed), and do not install or wear any additional EMF products for at least 5 days. This allows your system to adjust gradually. After 5 days, you may introduce additional tools such as:

• Room Harmonizers
• Device Chips
• Better ZZZs
• Cell Chip / iCell Chip
• Laptop Chips (for laptops and tablets)
• Car Harmonizer
• EMF Band XL / Personal Card XL or XXL

Note: Some individuals have reported that the EMF Band XL and Personal Cards may encourage a stronger adjustment response compared to the Home Harmonizer. Introduce these gradually based on your comfort level.

Disclaimer:

This information is for educational and informational purposes only and is not intended to diagnose, treat, cure, or prevent any disease. Individual responses vary. The Home Harmonizer and related products are not medical devices. If you have health concerns, consult a licensed healthcare professional.

Important Update for Older Home Harmonizers

If you’re using an older version of the Home Harmonizer, it may no longer provide sufficient EMF remediation on its own.

Since 2020, our Home Harmonizers have been upgraded to be 4x stronger to meet today’s increased EMF levels. Using anything less may leave your home, condo, or apartment underprotected.

• The newest model is the Series 1624 (4"x4"x4"), and it offers the most effective protection.
• If you have a Series 1533 or another 4"x4"x4" model, we recommend adding one Booster Box to bring it up to current protection standards.
• If you have an older 4"x4"x2" model, we suggest replacing it with a new Series 1624 Home Harmonizer for proper coverage.

This update is essential to ensure your space stays fully remediated.

Device Chip

The Device Chip is designed to help support EMF field harmonization at the source—right where your device receives power.

How to Use:

• Clip the chip onto the power cord of the device or appliance, as close to the device as possible
• The flat square side of the chip should press directly against the cord
• If the cord is too thick, secure the chip using electrical tape
• For Wi-Fi routers, be sure to attach the chip to the power cord only, not Ethernet, USB, or coaxial cables
• The chip is non-directional—either side can face the cord

Recommended Device Priority (Highest to Lowest)

If you’re working within a budget and can only remediate a few items, start with the highest priority sources of EMF exposure:

1. Wi-Fi Routers
2. Wi-Fi Extenders / Mesh Systems
3. Air Purifiers
4. AC Window Units
5. Baby Monitors and Cameras
6. Noise Machines / Sound Therapy Devices
7. Adjustable Beds
8. Smart TVs (used for streaming)
9. Desktop Computers
10. Area Fans (plug-in style)
11. Ceiling Fans (if wired through plug-in controls)
12. CPAP Machines
13. Security Cameras & Main Base Stations
14. Wireless Printers
15. Old-School Alarm Clocks (digital with plug-in cords)
16. Smart Home Command Units (used to control smart systems like lighting or temperature)

For Sensitive Individuals

If you’re especially sensitive to EMFs or are new to EMF support tools, it’s best to start with the Room Harmonizer alone for the first 5 days. This gives your system time to gently adjust before introducing other products like the Device Chip.

Note: Some individuals report that wearable items like the EMF Band XL or Personal Cards may encourage a stronger adjustment response. Add items one at a time and go at a pace that feels comfortable to you.

Disclaimer:

This information is provided for educational and informational purposes only and is not intended to diagnose, treat, cure, or prevent any disease. Individual responses may vary. The Device Chip is not a medical device. If you have health concerns or pre-existing conditions, consult with a licensed healthcare professional.

The Better ZZZs

The Better ZZZs is one of our most popular and versatile tools, commonly used to support EMF balance in sleeping environments. It may be helpful for individuals who:

• Sleep on metal bedframes, hybrid mattresses, or box spring systems
• Are more sensitive to EMFs or feel they rest better with additional energetic support

Many users find that one Better ZZZs provides sufficient coverage for a King-size bed, though placing one on each side of the mattress is often preferred for more balanced support.

Additional Uses

Better ZZZs is also used by customers for on-the-go energetic support in high-EMF environments, such as:

• Placed near the body (e.g., in a pocket, fanny pack, or sports bra)
• While flying, attending large indoor events, or spending time in densely-wired spaces (like conference centers)
• During travel, to support EMF balance in unfamiliar environments
• In personal vehicles, including both fuel and electric-powered
• Some users report benefits using multiple units in electric vehicles, along with a Car Harmonizer

Travel Tip

Frequent travelers often bring:

• 2 Room Harmonizers
• 1–2 Better ZZZs
• to support a more balanced energetic environment wherever they go.

Care Instructions

Do not machine wash this item. For convenience, place it inside a cotton or linen bag (similar to a pillowcase), allowing the cover to be washed separately when needed.

For Sensitive Individuals

Those who consider themselves highly EMF-sensitive may choose to wear two Better ZZZs at a time for added support during travel or in high-exposure areas.

Disclaimer:

This product and the information provided are not intended to diagnose, treat, cure, or prevent any disease. Individual experiences may vary. This item is not a medical device. If you have health concerns, please consult a licensed healthcare professional.

Dimensions

Approx. 5.0″ x 5.0″ x 0.4″

Instructions for Use In Sleeping Spaces

• Place the Better ZZZs under the mattress, as close as possible to where you sleep.
• If your bed includes a box spring, you may instead place the item between the mattress and the box spring.
• Ensure the placement is flat and secure, with no risk of the item shifting significantly during sleep.

In Vehicles

• Position the Better ZZZs on either side of the center console, near the metal seat guide, ensuring it rests securely and does not interfere with seat movement.
• An alternate placement is under the front seat, accessed from the back seat area.
• Important Safety Note: Do not place the Better ZZZs on the driver's side floor or in any area where it could interfere with foot movement, pedals, or safe vehicle operation.

Disclaimer

This product is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease. Placement suggestions are for environmental and energetic support only. Always use care and judgment when installing the product in vehicles or sleeping areas. Individual experiences may vary. If you have health or safety concerns, please consult a qualified professional.

Please Note: Coupons are only valid on purchases made through www.mindbodybalancefl.com.