- EMF Remediation
- >
- Home and Office
- >
- Home Harmonizer (Home and Office Remediation)
Home Harmonizer (Home and Office Remediation)
The Home Harmonizer is essential for EMF remediation in homes, apartments, condos, townhomes, and business offices. One unit effectively covers a space under 4,000 sq. ft.--as long as the property does not have solar panels or a metal roof.
If your space has any of the following, you’ll need to add a Booster Box to strengthen the harmonizing field:
- Solar panels
- A metal roof
- Over 4,000 sq. ft. of space
- An electric transformer on or near the property
- Proximity within 300 feet of a cell tower or SCADA pole
Think of proper EMF remediation like a justice scale: the more EMF toxicity in your environment, the more harmonizing support is needed to bring balance. Without the correct setup for your space and technology, exposure points will remain.
Installation
The Home Harmonizer can be installed in several safe and effective ways. While the preferred placement is on the exterior electric meter (analog, digital, or smart), installation should be approached with care and proper judgment.
Clamp Installation:
- For properties with above-ground wiring, use the provided metal clamp to secure the unit to the pipe exiting the top of the meter box.
- For underground wiring, clamp it to the pipe exiting the bottom of the meter box.
- The included clamp allows for non-invasive installation; however, always ensure the unit is secure and not interfering with electrical components.
Alternative Mounting Options:
If access to the electric meter is limited:
- The unit can be screw-mounted to surfaces such as brick, stucco, or sheetrock. Always confirm property ownership or permission before drilling.
- If screwing into a surface is not preferred, place the unit on a stable shelf positioned near the electrical panel, ensuring it does not block access to the breaker panel door or pose a tipping hazard.
INSTALL TIP #1 – Best Place to Install
Put the Home Harmonizer where the electricity enters your home. The best spots are:
- On or next to your electric meter outside (that’s the gray box from the power company)
- On the metal pipe near the electric meter (use the clamp included)
- If you can’t get to the meter, place it near your fuse box or breaker panel inside (as a backup option)
INSTALL TIP #2 – Give It Space
The Home Harmonizer works best when it has some space around it.
- Don’t sandwich it between two metal or electrical objects
- Make sure there’s at least 8 inches of open space behind or opposite the box
⚠️ Disclaimer: Installation should only be performed by individuals comfortable with basic hardware handling. If unsure, consult a licensed professional. The manufacturer and distributor are not responsible for improper installation, damage, or injury resulting from misuse or failure to follow local regulations.
Important Note:
Due to limited U.S. manufacturing (only two companies produce these specific gray boxes), you may notice slight cosmetic blemishes. Please know that every unit is brand new and fully functional, despite minor visual imperfections.
Dimensions: 4″ x 4″ x 4″
For Sensitive Individuals Starting EMF Remediation:
Begin with the Home Harmonizer (and Booster Box if needed), and do not install or wear any additional EMF products for at least 5 days. This allows your system to adjust gradually. After 5 days, you may introduce additional tools such as:
- Room Harmonizers
- Device Chips
- Better ZZZs
- Cell Chip / iCell Chip
- Laptop Chips (for laptops and tablets)
- Car Harmonizer
- EMF Band XL / Personal Card XL or XXL
Note: Some individuals have reported that the EMF Band XL and Personal Cards may encourage a stronger adjustment response compared to the Home Harmonizer. Introduce these gradually based on your comfort level.
Disclaimer:
This information is for educational and informational purposes only and is not intended to diagnose, treat, cure, or prevent any disease. Individual responses vary. The Home Harmonizer and related products are not medical devices. If you have health concerns, consult a licensed healthcare professional.
Important Update for Older Home Harmonizers
If you’re using an older version of the Home Harmonizer, it may no longer provide sufficient EMF remediation on its own.
Since 2020, our Home Harmonizers have been upgraded to be 4x stronger to meet today’s increased EMF levels. Using anything less may leave your home, condo, or apartment underprotected.
- The newest model is the Series 1624 (4"x4"x4"), and it offers the most effective protection.
- If you have a Series 1533 or another 4"x4"x4" model, we recommend adding one Booster Box to bring it up to current protection standards.
- If you have an older 4"x4"x2" model, we suggest replacing it with a new Series 1624 Home Harmonizer for proper coverage.
This update is essential to ensure your space stays fully remediated.
Please Note: Coupons are only valid on purchases made through www.mindbodybalancefl.com.